Magnetic Praticle Equipment

Magnetic Particle Equipments / MPI Equipment sales

Accessories for MPI

Magnetic particle testing is used for the testing of materials which can be easily magnetized. This method is capable of detecting open to surface and just below the surface flaws. In this method the test specimen is first magnetized either by using a permanent or an electromagnet or by passing electric current through or around the specimen. The magnetic field thus introduced into the specimen is composed of magnetic lines of force. Whenever there is a flaw which interrupts the flow of magnetic lines of force, some of these lines must exit and re-enter the specimen. These points of exit and re-entry form opposite magnetic poles. Whenever minute magnetic particles are sprinkled onto the surface of such a specimen, these particles are attracted by these magnetic poles to create a visual indication approximating the size and shape of the flaw.

Petro-Tracking Services Limited supplies wide range of Fluorescent Powders and Fluorescent Magnetic Powders used for crack detection of ferrous materials at highly competitive prices. The applications of these magnetic powders are in the field of forgings, foundry, fabrication, atomic energy, aerospace, ship building, railways, automobile, etc., for the purposes of quality control of components being manufactured for above and for maintenance and overhauling. The fluorescent powders will glow under UV or black light, in dark conditions to show the defects. The defects will be identified as brilliant yellow green indications. We also offer both oil suspendible and water suspendible magnetic powders.

Non fluorescent magnetic powders for crack detection are available in two colours namely black & red. Inspection is possible without the use of UV or black light and without the inconvenience of darkened area. Cracks can be viewed easily in daylight or visible light. The application, therefore, becomes more versatile. Inspection can be outdoors irrespective of availability of special light. Non Fluorescent Magnetic Powders are used by foundries, railways, fabrication and for pipe line inspection. The Non-Fluorescent Powders are available as powder, paste and liquid concentrate for suspension in either oil or water. They are also available in self spray Aerosol cans. Non-Fluorescent Powders for dry application are available in powder form

Magnetic Powders meet requirements of ASTM E – 709, ASME Boiler & Pressure Vessel Code Section V Article 7, IS 6410, BS 4069

Petro-Tracking Services Limited supplies and markets the following Magnetic Particle testing, Inspection equipments, machines and Accessories:
 

Top of page

Equipments for Magnetic Particle Inspection

Prod Type MPI
Machine

Bar testing inspection MPT MPI Machines

Bench Type MPI Equipment

Coil Type MPT
machines

 

FWDC MPI
Equipment

Demagnetizing Equipment

Rotating Arm
Yoke

'Crack Check' White Contrast & Black Ink

 


Dry Powders

Consumables for MPI in Aerosol Cans

Consumables for MPI -Fluorescent

Consumables for MPI Non-Fluorescent

 

ACCESSORIES FOR MAGNETIC PARTICLE INSPECTION

U. V. Black Light Assembly

Inspection in Dark Room for Fluorescent Magnetic Powder.

Magnetic Field Indicator(Pie Gauge)

Determines presence and approximate direction of external magnetic field.

Residual Field
Indicator

Residual Magnetic Field Indicator of range 0 to 3 Gauss, for measurement of effectiveness of demagnetizing operation.

Pear Shaped Centrifuge Tube with Stand

100 ml capacity pair shaped glass centrifuge tube for measuring settling volume, Bath Concentration, for Fluorescent and Non-Fluorescent wet magnetic particles.

 

Standard (Ketoes) Test Ring

Tool Steel Ring specimen for evaluating and comparing the overall performance and sensitivity of all types of magnetic powders and MPI System.

Copper Mesh Contact Pads

Braided copper mesh to establish a firm contact between the component surface and stocks of MPI Equipment in order to eliminate the possibility of sparking or heating of component while magnetizing

B.S. Test
Bar

A gadget for establishing existence of adequate longitudinal magnetizing force for MPI Equipment

U. V. Protective
Goggle

Protection to eyes against UV radiations while inspecting.

 

U. V. Torch

Batteryoperated , handy, light weight, UV/Black Light (LED) source for inspection.

U. V. Intensity Meter

Checking intensity of UV/ Black Light Bulb

Lux Meter

Checking intensity of White Light.

Light Bulb